|
Possible Cause |
Possible Remedy |
|
|
Restricted engine crankcase breather |
Refer to engine manufacturer's manual, clear restriction |
|
|
Turbocharger bearing housing sludged or coked |
Change engine oil and oil filter, overhaul or replace turbocharger as required |
|
|
Worn engine piston rings or liners |
Refer to engine manufacturer's manual and repair as required |
|
|
Burnt valves and/or pistons |
Refer to engine manufacturer's manual and repair as required |
|
|
Excessive dirt build up on compressor wheel and/or diffuser vanes |
Clean in accordance with details/instructions from Kinugawa Turbo Systems |
|
|
Turbocharger damaged |
Find and correct cause of failure, repair or replace turbocharger as necessary |
|
|
Dirty air cleaner |
|
Clean or replace element according to manufacturer's recommendations |
|
Restricted compressor intake duct |
|
Remove restriction or replace damaged parts as required |
|
Air leak in feed from compressor to intake manifold |
Replace seals, gaskets or tighten fastners as required |
|
|
Air leak beween intake manifold and engine |
Refer to engine manufacturer's manual and replace gaskets or tighten fastners |
|
|
Foreign object in exhaust manifold (from engine) |
Refer to engine manufacturer's manual and remove obstruction |
|
|
Restricted exhaust system |
Remove restriction or replace damaged parts as required |
