|
Possible Cause |
Possible Remedy |
|
|
Excessive dirt build up on compressor wheel and/or diffuser vanes |
Clean in accordance with details/instructions from Kinugawa Turbo Systems |
|
|
Turbocharger damaged |
Find and correct cause of failure, repair or replace turbocharger as necessary |
|
|
Failed diaphragm |
|
Replace using correct actuator service kit |
|
Leaking hose |
Replace hose and clips |
|
|
Wastegate mechanism set incorrectly |
|
Contact engine experts for correct setting details |
|
Restricted compressor intake duct |
|
Remove restriction or replace damaged parts as required |
|
Restricted air duct from compressor to intake manifold |
Remove restriction or replace damaged parts as required |
|
|
Restricted intake manifold |
Refer to engine manufacturer's manual and remove restriction |
|
|
Air leak in feed from air cleaner to compressor |
Replace seals, gaskets or tighten fastners as required |
|
|
Air leak in feed from compressor to intake manifold |
Replace seals, gaskets or tighten fastners as required |
|
|
Air leak beween intake manifold and engine |
Refer to engine manufacturer's manual and replace gaskets or tighten fastners |
|
|
Foreign object in exhaust manifold (from engine) |
Refer to engine manufacturer's manual and remove obstruction |
|
|
Restricted exhaust system |
Remove restriction or replace damaged parts as required |
|
|
Exhaust manifold cracked, gaskets blown or missing |
Refer to engine manufacturer's manual and replace gaskets or damaged parts |
|
|
Gas leak at turbine inlet/exhaust manifold joint |
Replace gasket or tighten fasteners as required |
|
|
Gas leak in ducting after turbine outlet |
Refer to engine manufacturer's manual and repair leak |
